
ENGLISH 8
IMPORTANT: clean the fi lters at least
monthly to remove any oil or grease
residuals.
To clean the grease fi lter
The metal grease fi lter has an unlimited life
and must be washed once a month by hand
or dishwasher at low temperature and with
a short cycle. With cleaning in a dishwasher
the grease fi lter may become dull; this does
not effect its fi ltering capacity.
Grease fi lter maintenance:
1. Disconnect the hood from the electric
power supply.
2 Remove the grease fi lters: pull the spring
release handle downwards, then remove
the fi lter.
3. After cleaning the grease fi lter, remount
in reverse order ensuring the entire
extraction surface is covered.
Charcoal fi lter maintenance
(if the hood is installed in recirculation
mode)
1. Remove the grease fi lters.
2. Fit the fi lter/s over the motor according
to the model:
• align the pins on the cowl with the
slots, then turn the fi lter clockwise until
it locks in place.
3. Reverse the above procedure to remove
the charcoal fi lter.
4. Refi t the grease fi lters.
Charcoal fi lter is neither lavable nor
regenerable.
Replace the charcoal fi lter every 4 months.
Lamp maintenance
1. Remove the fi lters and remove the burnt-
out bulb.
2. Replace the burnt-out bukb with a
new 40W max. incandescent or 28W
halogen bulb.
3. Refi t the fi lters.
IMPORTANT: make sure you don’t touch the
lamp with your hands.
Comentarios a estos manuales