IKEA HDL 10 S Instrucciones de uso descargar pdf (Pagina 8)

ENGLISH 8

With cleaning in a dishwasher the grease

ﬁ lter may become dull; this does not effect

its ﬁ ltering capacity.

Grease ﬁ lter maintenance:

1. Disconnect the hood from the power

supply.

2. Open the extraction grille or remove the

self-supporting grease ﬁ lter (in the latter

case, wash the ﬁ lter immediately).

3. Remove the device securing the grease

ﬁ lter.

4. Remove the dirty grease ﬁ lter.

5. After changing or washing the grease

ﬁ lter (depending on the model), reﬁ t

by proceeding in reverse order, making

sure it covers the entire extraction

surface.

Charcoal ﬁ lter maintenance

(Recirculation hoods only).

Charcoal ﬁ lter is neither lavable nor

regenerable.

Replace it every 4 months.

1. Disconnect the hood from the power

supply.

2. Open the extractor grille or remove the

self-supporting grease ﬁ lter.

3. Fit the ﬁ lter over the extraction motor

protection grille so that the slots on the

ﬁ lter match the hooking pins located at

the sides of the motor protection grille.

4. Turn the charcoal ﬁ lter clockwise to lock

it (bayonet ﬁ xing).

5. Make sure the internal selector

“Extractor /Filter “ is set to “Filter “.

6. Reﬁ t the extractor grille or grease ﬁ lter.

To remove the charcoal ﬁ lter proceed in

reverse order.

Lamp maintenance

1. Disconnect the hood from the power

supply.

2. Open the extractor grille or remove the

self-supporting grease ﬁ lter.

3. Remove the burnt-out lamp. Use

40W max. incandescent or 28W max.

halogen E14 lamps only.

4. Reﬁ t the extractor grille or grease ﬁ lter.

IMPORTANT: make sure you don’t touch the

lamp with your hands.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios