IKEA HOO E00 S Instrucciones de uso descargar pdf (Pagina 8)

ENGLISH 8

IMPORTANT: perform maintenance of

lters periodically as described on relevant

paragraph.

Greaselter

Cleanthegreaselteronceamonth.

1. Disconnect the electrical power supply.

2. Remove the grease lters

a - push the handles backwards

b - and then downwards.

3. After cleaning the grease lter ret in

reverse order, making sure the entire

extraction surface is covered.

Tocleanthegreaselter

The metal grease lter has an unlimited life

and must be washed once a month by hand

or dishwasher at low temperature and with

a short cycle. With cleaning in a dishwasher

the grease lter may become dull; this does

not effect its ltering capacity.

Fittingorreplacingcharcoallter

Charcoal lter is neither lavable nor

regenerable. Replace it every 4 months.

1. Disconnect the hood from the electric

power supply.

2. Remove the grease lter.

3. Fit the lters over the motor: make sure

the pins on the manifold match the slots,

then turn clockwise until locked.

4. Carry out in the reverse order to remove.

5. Ret the grease lter.

ReplacingtheHalogenlamps

WARNING:- Only use 20W MAX - G4

halogen lamps.

1. Disconnect the hood from the electric

power supply.

2. Insert the blade of a small at

screwdriver where indicated by the

three points, and with a gentle pressure

remove the light cover from its position.

3. Remove the faulty lamp and replace

with a new one.

4. Replace the cover (spring lock system).

IMPORTANT: make sure you don’t touch the

lamp with your hands.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 51 52

Comentarios a estos manuales

Sin comentarios