IKEA HDL 40 W Instrucciones de uso descargar pdf (Pagina 8)

ENGLISH 8

With cleaning in a dishwasher the grease

lter may become dull; this does not effect

its ltering capacity.

Greaseltermaintenance:

1. Disconnect the hood from the power

supply.

2. Open the extraction grille or remove the

self-supporting grease lter (in the latter

case, wash the lter immediately).

3. Remove the device securing the grease

lter.

4. Remove the dirty grease lter.

5. After changing or washing the grease

lter (depending on the model), ret

by proceeding in reverse order, making

sure it covers the entire extraction

surface.

Charcoalltermaintenance

(Recirculation hoods only).

Charcoal lter is neither lavable nor

regenerable.

Replace it every 4 months.

1. Disconnect the hood from the power

supply.

2. Open the extractor grille or remove the

self-supporting grease lter.

3. Fit the lter over the extraction motor

protection grille so that the slots on the

lter match the hooking pins located at

the sides of the motor protection grille.

4. Turn the charcoal lter clockwise to lock

it (bayonet xing).

5. Make sure the internal selector

“Extractor /Filter “ is set to “Filter “.

6. Ret the extractor grille or grease lter.

To remove the charcoal lter proceed in

reverse order.

Lampmaintenance

1. Disconnect the hood from the power

supply.

2. Open the extractor grille or remove the

self-supporting grease lter.

3. Remove the burnt-out lamp. Use

40W max. incandescent or 28W max.

halogen E14 lamps only.

4. Ret the extractor grille or grease lter.

IMPORTANT: make sure you don’t touch the

lamp with your hands.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

Comentarios a estos manuales

Sin comentarios