IKEA AVENTYRLIG Manual de usuario descargar pdf (Pagina 10)

To activate the function touch . To set or

change the heat setting touch one of the

control sensors.

To deactivate the function touch . The

cooking zones operate independently.

Using the Booster function

The Booster function makes additional

power available to the induction cooking

zones. Touch to switch it on, a lights

up on a display. After maximum 10 minutes,

the induction cooking zones automatically

return to cooking level

.

Power management

The power management shares the

maximum available power between two

cooking zones generating a pair (see

picture). Booster function can cause, that the

maximum available power for a pair is

exceeded. Then the second cooking zone

will be automatically reduced to a lower

power level. The display for the reduced

zone alternates between selected and

maximum available.

Using the Timer

Touch repeatedly until the pilot light of a

desired cooking zone displays. For example

for the front left zone.

Touch

or of the Timer to set the time

between 00 and 99 minutes. When the

pilot light flashes more slowly, the time

counts down. Set the heat settings.

If the heat setting is set and the time set has

elapsed, acoustic signal appears, 00

flashes, and cooking zone switches off. If

cooking zone is not in use and the time set

has elapsed acoustic signal appears and

00 flashes.

Select for a cooking zone to switch off

the function, and the pilot light of the

cooking zone selected flashes faster. Touch

and the remaining time counts

backwards to 00. The pilot light goes out.

STOP+GO

The function sets all cooking zones that

operate to the lowest heat setting . When

the function operates, you cannot change

the heat setting. The function does not stop

the timer function.

• To activate this function touch . The

symbol

comes on.

• To deactivate this function touch . The

heat setting that you set before comes

on.

Lock

When the cooking zones operate, you can

lock the control panel, but not

. It

prevents an accidental change of the heat

setting.

ENGLISH

10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 83 84

Comentarios a estos manuales

Sin comentarios